Nov
21

1/10 TEN-SCT Nitro 4WD RTR Now in Stock

The 4WD TEN-SCT™ truck has an amazing pedigree. It’s based on the performance-driven TEN-T™ platform and ROAR National Champion TEN-SCTE. The same painstaking engineering that dreamed up the TEN-T vehicle went into the creation of the TEN-SCT truck. The same aluminum chassis, race-tested suspension and superb handling characteristics have found a home in this no-holds-barred nitro version. Ready-To-Run, the TEN-SCT truck has the heart of a warrior and the chops to tear up any track.

Chassis Call-Out

Chassis Callouts

  • Durable, anodized aluminum TEN chassis
  • Aluminum, adjustable, oil-filled, coil-over shocks
  • 3.4 nitro engine
  • Performance tuned pipe
  • Spektrum™ SR300 receiver with 2.4GHz DSM® technology
  • Watertight, optimized Gen III radio tray
  • Three sealable differentials
  • Innovative air canister for water-resistant performance
  • Digital, high-torque waterproof steering servo
  • 12mm wheel hexes
  • Exclusive Losi® Eclipse&trade SCT tread pattern
  • Off-road beadlock-style wheels
  • Realistic SC bumpers with mud flaps
  • 4mm adjustable turnbuckles with captured ends
  • Captured hinge pins
  • Battery7.4V 1000mAh LiPo receiver pack and charger

Key Features

  • Remote Onboard Starting System (R.O.S.S.™)
  • Waterproof electronics
  • Spektrum™ DX2L transmitter
  • 3.4 nitro engine performance-tuned pipe
  • Aluminum threaded big bore shocks
  • Durable, anodized aluminum TEN-T chassis
  • 3.4 nitro engine
  • Performance-tuned pipe
  • Spektrum SR300 receiver with 2.4GHz DSM
  • Watertight, optimized Gen III radio tray
  • Three sealable differentials
  • Simple-adjust motor mount
  • Digital, high-torque waterproof steering servo
  • 12mm wheel hexes
  • Losi exclusive Eclipse™ SCT tread pattern
  • Off-road beadlock-style wheels
  • Realistic SC bumpers with mud flaps
  • 4mm adjustable turnbuckles with captured ends
  • Captured hinge pins
  • 7.4V 1000mAh LiPo receiver pack and charger

The 4WD TEN-SCT™ truck has an amazing pedigree. It’s based on the performance-driven TEN-T™ platform and ROAR National Champion TEN-SCTE. The same painstaking engineering that dreamed up the TEN-T vehicle went into the creation of the TEN-SCT. The same aluminum chassis, race-tested suspension and superb handling characteristics have found a home in this no-holds-barred nitro version. Ready-To-Run, the TEN-SCT truck has the heart of a warrior and the chops to tear up any track. With the waterproof servos and a tightly sealed radio box, you won’t have a problem driving in various weather conditions. Rain, snow or mud—go ahead and get it dirty! Offering extreme power and incredible torque, the 3.4 engine is the most powerful in its class.

Fire up the engine with the push of a button on the included DX2L transmitter. Forget glow igniters and pull starting. The TEN-SCT is equipped with the Remote Onboard Starting System (R.O.S.S.™). With the push of a single button on the included Spektrum DX2L transmitter, the glow plug is heated and electric starter engaged for instantaneous hands-free starting—no glow driver, no handheld and no more pull starting.

Product Specifications

Type: 4WD Nitro Short Course Truck
Scale: 1/10
Length: 21.34 in (524mm)
Width: 11.65 in (295.8mm)
Wheelbase: 13.15 in (334mm)
Weight: 6.75lb (3.06 kg)
Chassis: Anodized Aluminum
Suspension: 4-wheel independent long-travel
Drivetrain: 4WD
Motor or Engine: Losi 3.4cc
Radio: Spektrum DX2L
Kit/RTR: RTR
Shock Type: Aluminum
Fuel Tank Capacity: 82cc

Needed to Complete

- 20–30% Nitro Fuel
- Fuel Bottle

 


Nov
21

HPI Baja 5B Flux Electric Now in Stock

Large Scale Baja Fun with Massive Flux Power!
The Baja 5B Flux takes the stage as another large-scale release for HPI in 2012! This super-powerful, super-quick buggy can hit speeds up to 60mph with 8S power and a 480Kv motor! Powering this 1/5 Scale electric Baja is a Castle Creations Mamba XL2 ESC and 2028-780Kv electric motor that is 8s LiPo (29.6volts) compatible. With this powerful system and an 8S LiPo battery, there is nearly 10hp available right at your fingertips for immense speed and thrills!

The Baja 5B Flux is fully outfitted with the latest options, including the drivetrain parts from the Baja 5SC, adjustable VVC/HD shocks, 2.4GHz radio system and high-torque, large scale metal gear steering servo.

Completing the package is a new Baja 5B Flux-specific body with smooth, flowing body lines on both sides of the shell since there is no need for a fuel cap entry slot on the left side of the shell.

CASTLE CREATIONS MAMBA XL2 SPEED CONTROLLER

To handle the power and speed of the Castle Creations 2028-480KV motor in something the size and weight of the Baja 5B Flux, Castle came up with the Mamba XL2 speed controller – able to handle up to 8S LiPo (that’s 29.6 volts of power!) and fitted with a huge fan to keep things on the cool side.

CASTLE CREATIONS 2028-480KV MOTOR

If you want to go fast these days, you need to go brushless. If you want to go CRAZY FAST, you need to fit the Castle Creations 2028 motor! This massive powerplant features 480KV of power – that’s many times the torque of the motors used in our Sprint 2 Flux cars! You need a powerful motor to haul nearly 22 pounds of large-scale buggy through mud and sand, and this is precisely the motor for the job! With extra-thick wires, gold-plated connectors and cooling fins, the 2028 is the perfect match for the Baja 5B Flux.

LARGE BATTERY BOX

The 5B FLUX features a tool less easy entry large sized battery box capable of holding two hard case 4s LiPo packs or one 8s LiPo pack with an easy to reach opening for connecting the battery(s) and ESC together. We’ll have battery packs soon that will be the perfect fit for the Baja 5B Flux!
Super Heavy Duty Parts

Because of the ever-increasing power demands of Baja owners around the world, and the constant desire to cram as much power in the Baja chassis as possible, we’ve added all-new SUPER Heavy Duty drivetrain parts that will make sure the Baja 5B Flux can handle extreme conditions and massive power!
Super Heavy Duty Drive Shafts
Super Heavy Duty Diff Shafts
Super Heavy Duty Drive Axles
All-new extra-thick 9mm dogbones are the starting point of the 5B Flux drivetrain upgrade – these are new, thicker and stronger to outlast the roughest rides and racing action you can find! New wider rubber boots are included to keep the dirt and mud away. Getting the power from the diff gears to the new dogbones is a wider diff shaft that perfectly fits the increased diameter of the dogbones. The Baja 5B Flux is fitted with new Super HD drive axles to get power to the rear wheels, which fit the thicker dogbones.

VISCOUS TORQUE DIFF

Unique in the world of large-scale racing, the HPI Viscous Torque Differential gets the power to the rear wheels as smooth as silk. It’s easy to tune with optional diff oils and is fully fitted with hardened metal gears and an alloy case.

ALL METAL GEAR TRANSMISSION

From the input shaft and idler gear to the alloy-encased differential, every gear inside the sturdy Baja 5SC transmission is made from long-life alloy to keep your truck running all day long with minimal maintenance.

LONG TRAVEL SUSPENSION

The awesome Baja suspension really comes into its own with long-stroke VVC/HD shock absorbers and high-sidewall truck tires, letting the tires do their business whether you’re driving over rutted-out whoops or flying over a big tabletop!

HEAVY DUTY SHOCK ABSORBERS

VVC/HD shocks deliver improved handling over rough terrain and feature large 6mm diameter shock shafts for increased durability. Threaded shock bodies are used for easy adjustment of ride height.

SFL-11MG SERVO

The high-torque SFL-11MG servo features extra tough all metal gears for durability, an aluminum steering arm and a water resistant case.

All of the latest HPI kits are now fitted with reliable and feature-packed 2.4GHz radio systems for supreme control and confidence! The latest digital 2.4GHz radio technology allows you to confidently drive your HPI kit with other drivers without worrying about things like frequencies or radio conflicts. The radio features a pistol-grip design with a foam-grip steering wheel, 3 channel functionality, fold-down aerial, servo reversing and steering dual rate. This is a fully-featured, lightweight, 3-channel radio with advanced ergonomic features and total adjustability.

Set the radio up for your car with custom features like servo reversing, center trim, dual rate and more. Only 4 AA batteries are required to power the TF-20, so it’s light in your hands, and the foam-wrapped steering wheel makes it comfortable to hold. With the adjustable, built-in failsafe feature, you will even be protected just in case the radio ever loses signal.

TF-20 Radio Features Summary

  • Digital 2.4GHz technology
  • Run your HPI kit with other drivers without worrying about frequencies!
  • Adjustable built-in failsafe
  • 3 channel
  • Servo reversing
  • Steering dual rate
  • Center trim (steering and throttle)
  • Only 4 AA batteries required

HPI makes it as easy as possible to get into RC off-road action. The Baja 5B Flux is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals – diffs, shocks, suspension and more are perfect before you even open the package.

HPI Ready-To-Run vehicles bring you the same high performance and quality that you’d expect from a high end RC kit but with the added convenience of being factory pre-assembled to the highest standards – giving you a high performance RC vehicle straight from the box!

Just like all HPI cars and trucks, you get a full, in-depth instruction manual with step-by-step instructions that allow you to easily disassemble and reassemble your vehicle for maintenance and easy servicing. The manual also includes a handy parts list and full-scale drawings of the parts and hardware. And the included HPI RC Car DVD is your personal RC car expert in a box!

Features Summary
  • Pre-Assembled 1/5th scale Off-Road Buggy
  • Based on the Baja 5B Buggy
  • Castle Creations Mamba XL2 speed controller
  • Castle Creations 2820-480Kv motor
  • 6S and 8S LiPo compatible
  • New streamlined body design and graphics
  • TF-20 2.4GHz radio system with failsafe
  • Adjustable motor mount to fit option pinion gears
  • Powerful & waterproof SFl-11MG metal gear steering servo
  • Adjustable VVC/HD shock absorbers
  • Monocoque chassis
  • Long travel suspension
  • Viscous torque oil-filled gear differential
  • All-terrain tires and beadlock wheels
  • Aluminum shock towers front and rear
  • Hard plastic skid plates
  • Adjustable rear wing
  • Quick access to all critical maintenance points
  • Dual bellcrank steering
  • Cam type servo saver
  • All socket head hardware
  • Gunmetal anodizing
  • Full set of rubber-sealed ball bearings

#107684 RTR Baja 5B Flux
1/5th SCALE BUGGY with 2.4GHz RADIO
SPECIFICATIONS:
Length: 900mm
Width: 460mm
Wheelbase: 570mm
Weight: 9.7kg
WHAT YOU NEED:
4 AA Batteries for transmitter – HPI recommend #101938 Rechargeable AA Batteries!
2 x 4S or 1 x 8S LiPo battery with Dean’s plug – HPI recommend #107225 HPI Plazma packs!
Battery charger – HPI recommend Reactor 500 #101971 charger!

Oct
25

Maverick Vader XB 1/5 Scale 4WD Electric Brushless

Introducing the Vader XB 1/5th scale electric buggy from Maverick!

This is a HUGE buggy that can hit incredible speeds in the blink of an eye! With an extremely strong 4WD shaft drivetrain and twin LiPo battery power, the Vader can get over and through any type of terrain you can throw it at. A massively powerful 980KV motor gives the Vader XB monster amounts of torque for crazy-fast acceleration, and the ESC allows you to fit twin 7.4 or 11.1 volt LiPo batteries for up to 22.2 volts of power!

A sleek aerodynamic bodyshell lets the Vader XB slice through the air, while the large rear wing keeps the rear end planted through the turns. Large block tread tyres provide fantastic traction on all off-road surfaces including mud, grass, gravel and dirt, and the cool black wheels provide an extra bit of style and flash after the hard driving is completed.

The easy Maverick 2.4GHz radio system lets you simply switch on and drive – the radio finds an open frequency and lets you forget about frequencies altogether!

Features:

  • Crystal-free 2.4Ghz transmitter and receiver with built-in failsafe
  • Fully adjustable racing suspension
  • Fully independent double A-arm wishbone suspension
  • Attractive 3 split spoke black wheels
  • 4 oil-filled rebuildable threaded shocks with progressive springs
  • Special titanium anodised shock tops
  • Fully adjustable turnbuckles all round
  • 20kg large scale metal gear steering servo
  • Tough efficient 4WD shaft drivetrain
  • Fully ballraced drivetrain
  • 18mm square wheel adaptors
  • Pre-cut body factory finished
  • Front and rear moulded bumpers
  • Universal joint driveshafts on the front
  • High downforce black rear wing
  • Sealed receiver box
  • Tough gear differentials
  • Steel spur gear and pinion
  • Composite shock tower covers
  • Adjustable twin battery straps with Velcro straps
  • Metric hardware used throughout
  • All round block tyres

Specification:
(LxWxH) 710mm x 450mm x 276mm
Wheelbase 503mm
MM – 27BL 980KV Motor
MSC – 27BL 150A Electronic Speed Control
MS – 241 Steering Servo 20kg
MRX – 242 2.4 GHz 3Ch Receiver
MTX – 242 2.4 GHz 2Ch Transmitter

Please Note: This is not a toy! Not suitable for children under 14 years of age.

#MV12701 Maverick Vader 1/5 Scale 4WD Electric Buggy RTR
Fully assembled 4WD 1:5th scale electric buggy with painted bodyshell
2CH 2.4Ghz Transmitter/Receiver with Failsafe

Requirements:
4x AA batteries for transmitter
2x 7.4V or 11.1V LiPo batteries with Deans Connectors
Compatible charger for your choice of battery

Available in Store now!

 


Oct
25

EME Petrol Engines now in Stock

EME 60cc Petrol Engine

This is the latest EME-60 engine . Improved porting in the cylinder has increased power, and all the crankshafts are now x-rayed before assembly. The new crankcase is a lot stronger design, and the short standoffs means there is a lot less flex. The Rcexl CDI is manufactured specifically for EME with a re-designed advance curve for a smoother running engne with less vibration and more power. There is also a new reed block to further increase power. The exhaust bolt pattern is the same as most of the popular 50cc and 55cc engines, so our muffled Pitts muffler bolts straight on. Firewall mount dimension 67 x 78. Typical revs on a 23×10 are 6450. The carb feature extended throttle and choke arms, located on opposite sides of the carb to make connection easier. The power for the $ is unbeatable. This is truly a great engine. As with all the engines we sell, these are also test run and tuned by us so there is no mucking around when you receive it. Just bolt it to your model and go flying

Specifications:

Displacement: 60cc
Weight: 1390g/engine, 180g/muffler, 140g/ignition module
Carburetor: Genuine Walbro
Compression Ratio: 7.6-1
Power: 6.2HP@7200RPM
Idle RPM: 1350RPM
Practical RPM: 13507500 RPM
Thrust: 16.2kgf (50
200M altitude)
Thrust: 14.7kgf (1800
2000M altitude)
Spark Plug: EME/ NGK CM6
Ignition Voltage: 4.8V
6.0V
Fuel-oil:  30
1 ratio
Recommended Propeller: 2 blades, 23*10, 24*8, 24*10(wooden prop, C.F. prop)
Firewall mounting size 67 x 78

Package Contents:

EME60 engine
Muffler
Rcexl Ignition module
Rcexl Opto Kill switch
Spark plug CM6
Stand-offs 4pcs
Muffler screw 2pcs
Muffler gasket
English manual
Firewall drilling template

35cc and 55cc also available in store

 


Oct
03

Traxxas Funny Car

Traxxas Funny Cars now in Stock

Experience the Speed, Power, and Adrenaline
of NHRA Drag Racing in 1/8 Scale!


Choose your model from the winningest team in drag race history, 17X champion John Force Racing.

 

Outrageous Horsepower, Intense Speed, and Unmatched Realism
Cubic-inch for cubic-inch, no motorsport offers as much sheer power and performance as NHRA drag racing. A single funny car produces more horsepower than the first 8 rows of cars in a stock-car race. Drivers pull more than five Gs when they launch, accelerating faster than a fighter jet. Over 300mph is achieved in about the time it takes to read this sentence.

The Traxxas Ford Mustang NHRA Funny Car Race Replica brings it all to life the Traxxas way with outrageous horsepower, intense speed, and the unmatched realism and authenticity that only comes from being both fans and dedicated participants in NHRA drag racing. The Traxxas NHRA Funny Car accurately captures the total racing experience with realistic staging action on the start line. After your burnout, shake up your opponent by being the last one to roll into the stage beam. When the lights go green, release the Launch Control for a perfect reaction time. You’ve already set your wheelie bar and used the multi-function knob on your transmitter to fine-tune the launch for maximum traction and acceleration. From there, it’s up to you to keep it full throttle down the track and across the finish line.

Off the track, the realism continues with tilt-up licensed bodies developed from the full size CAD drawings, tube style chassis, super-sticky belted slicks, and accurate detailing. The front latch eliminates body clips for fast access to the battery compartment. The full suspension system is engineered to give the Traxxas NHRA Funny Car the ability to handle the ruts and bumps of real world track surfaces. Combined with the Traxxas DTS-1 Drag Timing System (sold separately) and the Traxxas Link application on your TQi Docking Base (all sold separately), Traxxas drag racing becomes a full-on simulation with timing so accurate, races are won and lost by a millisecond. Only Traxxas could bring this level of intense racing competition and all-out fun together in such a tightly engineered package.


Realistic “Tube” Chassis
The steel, welded-tube construction of the full-size John Force Racing Funny Cars is replicated by the Traxxas NHRA Funny Car’s gleaming black-chrome chassis. Details including the front-mounted fuel tank (non-functional, of course) and driver’s roll cage give the Funny Car authentic looks to match its realistic performance. The wheelie bar is a functional tuning aid that helps the Funny Car transfer weight to the rear wheels for a perfect launch.

 

 

TQi 2.4GHz Intelligent Transmitter
The World’s Most Advanced Ready-To-Race® Radio System

The Traxxas Ford Mustang NHRA Funny Car is equipped with the TQi,™ the world’s most advanced Ready-To-Race® radio system. The radio system is the sole connection between the driver and machine and the all-new Traxxas TQi has been engineered to be precise, comfortable, powerful, and reliable. The TQi radio system arrives with a full complement of tuning features including steering and throttle sensitivity, steering percentage, braking strength, servo end points, and more. The unique 4-channel transmitter allows you to select Burnout, Staging, and Race Modes. When you’re ready to pull the trigger and race, the Launch Control switch lets you hold full throttle and flip the switch to launch. Use the multi-function knob to dial in the ET-3s speed control’s torque settings for the quickest launches. Tune for temperature and track conditions just like the pro’s. The TQi’s long-range, high-output, 2.4GHz signal combines with proven Traxxas reliability for rock-solid performance.
It’s so advanced, it doesn’t even need an external antenna.

 

 


Over-The-Top Brushless Horsepower
NHRA Funny Cars are famous for their fire-breathing 8000 horsepower engines that deliver massive thrust and propel them to speeds over 300mph in just 4-seconds. When the light goes green, the new ET-3s brushless power system responds in an instant and unloads a massive blast of Extreme Power™ that rockets the Traxxas Ford Mustang NHRA Funny Car to the finish line. There are no brushes to wear out so you can dial in consistent times and blazing speed, pass after pass. Traxxas’ exclusive Staging Mode (patent pending) allows the Traxxas NHRA Funny Car to creep into the stage beams of the DTS-1 timing system (sold separately) allowing you to execute authentic starting line strategy against your opponent.

 

 

DTS-1 Drag Timing System
Capture the Total Drag Racing Experience
(sold separately)

You’ve never seen anything like this before! Traxxas innovation takes your racing fun to a whole new level with an authentic, portable, and affordable drag race timing and scoring system. The DTS-1 Drag Timing System unfolds and turns any strip of smooth asphalt into your own personal drag strip. Everything has been scaled to re-create the entire drag racing experience with as much accuracy and realism as possible. The center point is the authentic Christmas tree with its super bright LED display and modern stage light configuration.

Dual beams on the starting line allow competitors to pre-stage and stage with laser precise accuracy. Depending on your quickness and skill, you can select either a pro or sportsman tree for the countdown. When the lights go green, the race is on; but don’t jump the start or you’ll be disqualified! At the end of the track, the finish line beams determine the winner with millisecond accuracy. Race up to 330 feet or the equivalent of a 1/4 scale quarter mile.

Want even more detail? Use the TQi Docking Base and an iPhone or iPod touch with the Traxxas Link application, (all available separately), and the DTS-1 creates digital time slips with your elapsed time, reaction time, and trap speed to a tenth of a mph. The DTS-1 adds a whole new dimension that takes your drag racing fun to an exciting, full-on simulation of the NHRA pro racing experience.


Pro-Level Racing Simulation

  • Laser precise dual-beam staging and speed trap
  • Race up to 330 feet (quarter-scale 1/4 mile)
  • Authentic starting line Christmas tree with pre-stage and staging lights
  • Simple pushbutton operation
  • Pro and Sportsman tree
  • High-intensity LEDs
  • Portable, with easy and fast setup
  • Compatible with the Traxxas Link App and TQi Docking Base (#6510)
    to show elapsed time, reaction time, and trap speed (sold separately)

 

 

Accessory TQi Docking Base
(sold separately)


The TQi radio system is Docking Base ready so that you can use your iPhone or iPod touch and Traxxas Link (available on the App Store) to finesse all the nuances of Pro competition. Traxxas Link works with the ET-3s electronic speed control in the Traxxas NHRA Funny Car to fine tune the Launch Control so you can take the win. Traxxas Link also works with the DTS-1 to fill in your time slip with reaction time, elapsed time, and mph. Keep a run history on each of your models. Share time slips and set up races with your friends–Traxxas Link runs the race and fills in the brackets for you. Any two cars can compete fairly, regardless of their top speeds! Race like the pros, using staging strategy to pressure your opponent. Only Traxxas makes drag racing so easy, accurate, fast, and fun!

MODEL 6907: Traxxas Ford Mustang NHRA Funny Car Race Replica, fully assembled, Ready-To-Race®, with 4-channel TQi™ 2.4GHz radio system, Traxxas ET-3s Brushless Power System, and Race Replica ProGraphix® painted body.


Page 1 of 612345...Last »